 |
 |
Classic
Bagger Apes
Nothing gives instant attitude to a Bagger more than a fresh new
set of ape hangers! We think everyone should do it so we created
an affordable alternative for the cost conscious… Our Bagger Apes
are mandrel bent from one inch seamless steel tubing and then
treated to a beautiful chrome bath or gloss black powder coated.
Our new bars are “Fly By Wire” ready and they are both drilled for
internal wiring and dimpled if you want external wires..It’s your
choice. Our Apes start at a unique to our industry and very
popular 10” height and are available
in 2 inch increments at 12” / 14” or 16” heights as well.
We have complete cable and wire install kits and accessories
available separately.
Part # BA-10-C / 10” Bagger Apes - Chrome / Price: $99.00
Part # BA-10-B / 10” Bagger Apes - Black / Price: $99.00
Part # BA-12-C / 12” Bagger Apes - Chrome / Price: $99.00
Part # BA-12-B / 12” Bagger Apes - Black / Price: $99.00
Part # BA-14-C / 14” Bagger Apes - Chrome / $129.95
Part # BA-14-B / 14” Bagger Apes - Black / Price: 129.95
Part # BA-16-C / 16” Bagger Apes - Chrome / Price: 129.95
Part # BA-16-B / 16” Bagger Apes - Black / Price: 129.95
< Click on image to see larger
 |
|
------------------------------------------------------------------------------------------------- |
 |
|
Monkey Bagger Bars
Holy shit these bars are bitchin!! When Paul took to tricking out
his Street Glide he wanted to combine chopper styling and attitude
with a unique handlebar that Bagger Nation could truly call its
own! Talk about nailing it! Since we introduced the Monkey Bars
we’ve seen some guys trying to copy them, but the quality is shit,
they made straight corners instead of our sexy arched points. They
also have made no consideration for internal wiring where we work
the inside of our bars to make your wires go through smooth as
possible! There is just no cutting corners when it comes making
high quality, great looking Original Monkey Bars! Believe
us...You’ll get what you pay for! Our hand crafted, made one at a
time Monkey Bars are designed to fit all touring models with bat
wing fairings such as Street Glides, Electra Glides and Ultra’s.
Nothing will add more attitude to your bagger than a set of Paul’s
Original Monkey Bars! Our standard most popular size sits 12” tall
(installed) 36” wide with a 9” pullback with an 1.25” diameter.
They are available in both chrome or gloss black powdercoated
finishes. Custom heights from 10” thru 18” are available through
special order by calling the shop. Each bar is pre-drilled for
easier internal wiring. They also work with the new
fly-by-wire throttle system found on 2008 and later touring
models.
Make sure to order a corresponding Supersize Kit
Part # MBB-10-C / Monkey Bagger Bar chrome 10” x 1 1/4” /
$375.00
Part # MBB-12-C / Monkey Bagger Bar chrome 12” x 1 1/4” / $375.00
Part # MBB-14-C / Monkey Bagger Bar chrome 14” x 1 1/4” / $395.00
Part # MBB-16-C / Monkey Bagger Bar chrome 16” x 1 1/4” / $449.00
Part # MBB-10-B / Monkey Bagger Bar black 10” x 1 1/4” / $375.00
Part # MBB-12-B / Monkey Bagger Bar black 12” x 1 1/4” / $375.00
Part # MBB-14-B / Monkey Bagger Bar black 14” x 1 1/4” / $395.00
Part # MBB-16-B / Monkey Bagger Bar black 16” x 1 1/4” / $449.00
Above bars fit all touring models with bat wing fairings from
1986 thru 2012
< Click on image to see larger
|
|
------------------------------------------------------------------------------------------------- |
 |
|
OEM
Monkey Bars
If you’re a Road Glide or Road King freak don’t feel left out! We
make killer bars for your bike too! Paul wanted to lend all the
chopper styling and attitude he could to the Road Glide / Road
King platform so he took a set of his classic Original Monkey
Bars, widened them a couple of inches, gave them some swoopy
arches and WHAM... instant attitude adjustment! Our classic
Monkeys were designed
for Road Glide / Road Kings but they fit on just about any OEM
model out there! Softails, Fatbobs...You name it! Since we
introduced the Monkey Bars we’ve seen some guys trying to copy
them, but the quality is shit, they made straight corners instead
of our sexy arched points and corners and they have made no
consideration for internal wiring where we work the inside of our
bars to make your wires go thru smooth as possible! There is just
no cutting corners when it comes making high quality, great
looking Original Monkey Bars! Believe us...You’ll get what you pay
for! Our standard most popular size sits 10” tall (installed) 33”
wide with a 6” pullback with an 1.25” diameter. We also offer them
in a 8” thru 20” heights by special order. Taller bars will
naturally get wider. 12” bars measure 33” wide and 15” bars
measure 37” wide. They are available in both chrome or gloss black
powdercoated finishes. Each bar is pre-drilled for easier internal
wiring. They also work with the new fly-by-wire throttle system
found on 2008 and later touring models.
Make sure to order a corresponding Supersize Kit
Part # OEM-10-C / OEM Monkey Bar chrome 10” x 1 1/4” / $375.00
Part # OEM-12-C / OEM Monkey Bar chrome 12” x 1 1/4” / $375.00
Part # OEM-14-C / OEM Monkey Bar chrome 14” x 1 1/4” / $395.00
Part # OEM-16-C / OEM Monkey Bar chrome 16” x 1 1/4” / $449.00
Part # OEM-10-B / OEM Monkey Bar black 10” x 1 1/4” / $375.00
Part # OEM-12-B / OEM Monkey Bar black 12” x 1 1/4” / $375.00
Part # OEM-14-B / OEM Monkey Bar black 14” x 1 1/4” / $395.00
Part # OEM-16-B / OEM Monkey Bar black 16” x 1 1/4” / $449.00
Above bars fit Road Glide / Road King and all Harley models
1986 thru 2012
< Click on image to see larger
|
|
------------------------------------------------------------------------------------------------- |
 |
|
Monkey Guard Bars
Paul’s Monkey Bars are the hottest Bagger Bars available! Now you
can continue the Monkey look with this Monkey styled engine guard.
These
guards in stock and ready to rock in either black or chrome. They
work on all Baggers 1997 to present.
Part # MEG-C / Monkey Engine Guard / Chrome 97-2008
Part # MEG-B/ Monkey Engine Guard / Black 97-2008
Part # MEG-C-9 / Monkey Engine Guard / Chrome 09-10
Part # MEG-B-9 / Monkey Engine Guard / Black 09-10
Black / Price: $399.95
Chrome / Price: $399.95
**Monkey Engine Guards will not
work with HD leg guards**
< Click on image to see larger
|
|
------------------------------------------------------------------------------------------------- |
 |
|
“Super Clamp” 1 Piece Riser Clamp
Bagger Nation handlebars installed on 2007 and earlier touring
models MUST be updated with a one piece riser clamp. All pre 2008
HD touring models have a two piece top clamp system that we feel
can create a safety problem when handlebars are used with internal
wiring. Since we were designing a new clamp anyway, we decided to
solve all the issues we have heard about with other bars and
clamps at the same time! So our new Super Clamp has bar locking
set screws built into the top of it that will prevent handlebars
with poor knurling from slipping. It also has large wire reliefs
for internal wires and it been designed with extra internal
clearance for those adding more switches. Lastly each clamp is now
CNC machined from 6061-T6 aircraft aluminum so they are bullet
proof and you can torque the shit out of them! The solid riser
clamp MUST be used every time a handlebar change is made to 2007
and earlier Harley Davidson touring models. Our new Super Clamp is
truly the highest quality, problem solving, badass clamp
available!
Part# 55918-08 / “Super Clamp” 1 Piece Riser Clamp / Price: $
59.95
|
|
------------------------------------------------------------------------------------------------- |
 |
|
Supersize Kit
The Supersize kits are the easiest way to make sure that
you’ve got everything you’ll need to install your new Bagger
Nation handlebars! Each kit includes: Clutch cable, throttle
cables (if needed) our pro-system brake line (if needed) wires,
shrink, pull wire, instructions and gaskets. Of course your
contents will vary by model, year and equipment. We offer the kits
in standard black or braided stainless and we have kits for ABS
equipped models as well! There are so many kit variations and
combinations that we couldn’t possibly list every part number! So
please call us with your make, model, year and let us know if your
bike has ABS or a hydraulic clutch and we’ll give you the correct
part # and price over the phone.
Supersize kits vary in price from $174 to $449.99 depending on
style, finish and equipment.
Call us for your particular application. Please have model, year
and what height of bars you’re using and if your bike is equipped
with ABS brakes or a hydraulic clutch - (602) 840-4205
Custom Finishes Available!
< Click on image to see larger
|
)
){kind=small}
)
){kind=small}
){kind=small}
)
){kind=small}
)
){kind=small}
)
)
